New in our collection

Prepared festoon kit with 60 individual 50 cm lamp modules and six extension cables: 2 × 1.5 m, 2 × 3 m and 2 × 6 m. Ideal for arranging decorative lighting across your event space. The required festoon controller is not included and must be rented separately. One controller runs two strings of 60 modules. The image shows one included module, not the complete kit.

Choose a variant to view this product and add it to your quote.

5 variants available

Double swivel coupler with two hinged clamps and screw closures, for round tubes with an outside diameter of 42–52 mm. The swivel joint allows the two clamp halves to be positioned at an angle to one another. Black powder-coated finish. Check the tube diameter, complete rigging arrangement and condition of the coupler before use. The permitted load depends on the application; a model specification is not proof of inspection of the individual rental item.

Double swivel coupler with two hinged clamps and screw closures, for round tubes with an outside diameter of 40–52 mm. The swivel joint allows the two clamp halves to be positioned at an angle to one another. Silver finish. Check the tube diameter, complete rigging arrangement and condition of the coupler before use. The permitted load depends on the application; a model specification is not proof of inspection of the individual rental item.

Water-based haze fluid for atmospheric lighting at concerts, theatre productions and events. Haze makes light beams visible and adds depth to a lighting design. Supplied as one 5 L can for purchase; a haze machine is not included. Use only in a haze machine that specifies this type of fluid. Check the machine manual before filling, and follow its operating and shutdown instructions. Store the fluid in its original container at 5-35 degrees Celsius, away from light. Follow the safety data sheet when handling and storing the fluid.

Give light beams definition and create atmosphere for concerts, theatre and indoor events. The Haze 1200 Pro is a 1200 W haze machine with a 5 L tank and separate control of fan speed and haze output. Use the onboard display for a standalone setup, or integrate it into your lighting desk with two DMX channels. Allow approximately 2.5 minutes for warm-up. The display warns when the fluid level is low. Place the unit on the floor in a dry indoor environment; its IP20 housing is not weatherproof. Haze fluid is available separately in a 5 L can below. At the end of your event, set haze output to zero and keep the unit powered for 80-90 seconds so the self-cleaning cycle can finish before switching off. Download the user manual for setup, DMX operation and safe use.

Choose a variant to view this product and add it to your quote.

43 variants available

Choose a colour to view this product and add it to your quote.

3 colours available

USB-C to HDMI adapter kit for connecting a compatible USB-C video source to an HDMI display or projector, up to 4K at 30 Hz. The source port must support DisplayPort Alt Mode video output; a charging-only USB-C port will not work.

10 m HDMI cable with full-size HDMI Type A male plugs at both ends. For connecting an HDMI source to a display, projector or other HDMI equipment.

7.5 m HDMI cable with full-size HDMI Type A male plugs at both ends. For connecting an HDMI source to a display, projector or other HDMI equipment.

3 m HDMI cable with full-size HDMI Type A male plugs at both ends. For connecting an HDMI source to a display, projector or other HDMI equipment.