The K&M 21435 is a black steel tripod stand for loudspeakers with a compatible 35 mm stand socket. Height adjusts from 1440 to 2230 mm using the push-button locking system and clamping screw. Braced folding legs provide a 1150 mm base spread when fully opened. The maximum load is 50 kg with the load centred on a horizontal surface and no lateral forces such as wind or shocks. Open the legs until the braces are horizontal, secure both the locking pin and clamping screw, and use two suitably capable people to mount and raise a loudspeaker. Do not move the stand while loaded.

The Kenwood TK-3701D is a compact two-way radio for crew communication at events, productions and during setup and breakdown. It supports both digital dPMR446 and analogue PMR446 and can be used licence-free in the Netherlands. The European version has 48 channel memories across three zones and an RF output of 0.5 W ERP. Each rental includes one radio, a Kenwood KMC-45 speaker microphone, an acoustic-tube earpiece and a Kenwood KSC-35 charger. Radios must use the same frequency, operating mode and compatible tone or code settings to communicate. Select analogue mode when communicating with analogue PMR446 radios. Coverage depends on buildings, obstructions and the surroundings; a fixed range is not guaranteed. Protect the radio from water when audio accessories are connected.

Start with a 207 × 200 cm opening in Banner 510; adjust the size and material.

2160 variants available

Base collar requested for the first connection level of a Layher Allround scaffold. Exact manufacturer execution remains unconfirmed; this is a working listing. Rental per piece per day, excluding 21% VAT. No complete structure or load rating is represented. Transport, assembly, dismantling and structural design are not included.

Individual Layher Allround horizontal diagonal with a 103.5 × 103.5 cm working bay designation. The dimensions describe the bay, not the physical diagonal length. The 103.5 cm working designation has not yet been matched exactly to the manufacturer’s 1.03/1.04 m family. Technical identification must be confirmed before use. Transport, assembly, dismantling and structural design are not included.

Individual Layher Allround horizontal diagonal with a 207 × 207 cm working bay designation. The dimensions describe the bay, not the physical diagonal length. Transport, assembly, dismantling and structural design are not included.

Individual Layher Allround horizontal diagonal with a 103.5 × 207 cm working bay designation. Left-hand execution. The dimensions describe the bay, not the physical diagonal length. The 103.5 cm working designation has not yet been matched exactly to the manufacturer’s 1.03/1.04 m family. Technical identification must be confirmed before use. Transport, assembly, dismantling and structural design are not included.

Individual Layher Allround horizontal diagonal with a 103.5 × 207 cm working bay designation. Right-hand execution. The dimensions describe the bay, not the physical diagonal length. The 103.5 cm working designation has not yet been matched exactly to the manufacturer’s 1.03/1.04 m family. Technical identification must be confirmed before use. Transport, assembly, dismantling and structural design are not included.

Individual Layher Allround ledger with a 51.8 cm working-size designation. This is an ordinary ledger, not a U-ledger, reinforced ledger or event deck bearer. Transport, assembly, dismantling and structural design are not included.

Individual Layher Allround ledger with a 103.5 cm working-size designation. This is an ordinary ledger, not a U-ledger, reinforced ledger or event deck bearer. The 103.5 cm working designation has not yet been matched exactly to the manufacturer’s 1.03/1.04 m family. Technical identification must be confirmed before use. Transport, assembly, dismantling and structural design are not included.

Individual Layher Allround ledger with a 157 cm working-size designation. This is an ordinary ledger, not a U-ledger, reinforced ledger or event deck bearer. Transport, assembly, dismantling and structural design are not included.

Individual Layher Allround ledger with a 207 cm working-size designation. This is an ordinary ledger, not a U-ledger, reinforced ledger or event deck bearer. Transport, assembly, dismantling and structural design are not included.