The ALP Lift LMC 475 is a manually operated material lift for positioning equipment and installation materials. Its maximum load is 250 kg at a 330 mm load centre, with a maximum lifting height of approximately 4.75 m depending on fork orientation. Use only on a firm, level surface with the castor brakes applied. Do not move the lift while loaded or use it to lift people. Confirm the required forks, adapters and accessories when booking.

Amplifier rack for Apogee AE5 loudspeakers, with the original Apogee P500RV processor and digital amplifiers. It provides the separate amplification and processing needed by the AE5 system. This listing is for the rack only. AE5 speaker cabinets are rented individually and are not included. Tell us how many cabinets you want to use so we can confirm the suitable rack arrangement, connections and cabling for your system. The rack accepts 2 inputs and supports a maximum of 2 AE5 cabinets per output, with a maximum of 4 AE5 cabinets in total. This capacity applies only to the corresponding AE5 cabinets, not to a mix of loudspeaker models. Confirm the processing, amplifier channel allocation, connections and cabling for your system before use.

Apogee AE5 two-way loudspeaker for small live-band PA systems, speech reinforcement and delay coverage. The cabinet combines a 12-inch low-frequency driver with a 1-inch high-frequency compression driver and uses external bi-amplification. Add AE10 subwoofers when the system needs extra low-frequency support. The rental price is per cabinet, not per pair or complete PA system. The AE5 amplifier rack is a separate rental item and uses the original Apogee P500RV processor with digital amplifiers. Select the required number of cabinets and arrange the matching rack and speaker cabling separately. Share your venue, audience layout and cabinet quantity so we can help plan the system. Use the matching processing and correctly configured amplifier channels and cabling; do not connect the cabinet directly to a mixer output.

Amplifier rack for Apogee AE10 subwoofers, with the original Apogee P10RV processor and digital amplifiers. Use it as the amplification and processing section of an AE10 subwoofer system. This listing is for the rack only. AE10 subwoofer cabinets are rented individually and are not included. Tell us how many subs you want to use and which top cabinets will accompany them so we can confirm the suitable rack arrangement, connections and cabling. The rack accepts 2 inputs and supports a maximum of 2 AE10 cabinets per output, with a maximum of 4 AE10 cabinets in total. This capacity applies only to the corresponding AE10 cabinets, not to a mix of loudspeaker models. Confirm the processing, amplifier channel allocation, connections and cabling for your system before use.

Apogee AE10 dual-15-inch subwoofer for low-frequency reinforcement in a live sound system. Pair it with AE5 top cabinets when music or live performance calls for more bass support. The AE10 requires external amplification and matching loudspeaker processing. The rental price is per subwoofer cabinet, not per pair or complete system. The AE10 amplifier rack is rented separately and uses the original Apogee P10RV processor with digital amplifiers. Top cabinets, the amplifier rack and speaker cabling are not included in this cabinet rate. Tell us the number of subs and top cabinets, venue and intended use so we can help match the system. Use the correct processing and cabling for the agreed configuration; the subwoofer does not connect directly to a mixer output.

Large-diaphragm, side-address cardioid condenser microphone for recording, broadcast and sound reinforcement. Requires 48 V phantom power and provides a balanced 3-pin XLR output, a switchable 80 Hz high-pass filter and a 10 dB pad. Rental mount, case and cables remain to be confirmed.

The Behringer SC-U connects StageConnect, multichannel USB audio and Ultranet for recording, playback and personal monitoring. StageConnect carries up to 32 channels in total, shared between both directions. Ultranet provides 16 input and 16 output channels. Routing adapts automatically to the active connections. The XLR connectors carry digital StageConnect signals, not analogue microphone or line-level audio. Use 110 Ω XLR cabling, such as suitable DMX cable. Power is supplied via a compatible StageConnect host or an external 12 V DC supply, depending on the setup.

The Behringer WING COMPACT is a digital mixing console for live music, conferences and multitrack recording. It combines 40 stereo input channels and eight stereo auxiliary channels with 24 local Midas PRO microphone preamps and eight XLR outputs. Thirteen motorised faders and a 10.1-inch touchscreen provide hands-on control, while 28 stereo buses support front-of-house and monitor mixing. An integrated 48-in/48-out USB audio interface connects to a recording computer. Supplied in a flightcase with one power cord. No other accessories are included.

Choose a colour to view this product and add it to your quote.

16 colours available

Black 3.0 × 5.0 m backdrop with ties, fabric grade 320gr. Flame-retardancy certification and fibre composition are not confirmed. Check your venue’s fire-safety requirements with us before booking.

Black 3.0 × 6.0 m backdrop with ties, fabric grade 320gr. Flame-retardancy certification and fibre composition are not confirmed. Check your venue’s fire-safety requirements with us before booking.

A bag of 100 black nylon cable ties for cable tidying and lightweight fastening, including fixing printed fence banners to suitable attachment points. Each tie is 368 mm long and 4.8 mm wide, with a self-locking, non-releasable closure. Thread the tail through the head, tighten by hand and trim the excess neatly. Sold per bag: quantity 1 means 100 ties; quantity 2 means 200 ties. Banner and fence are not included. Not for lifting or load-bearing suspension.