Event equipment rental
Your event.
The right equipment.
Truss, cables, screens and event styling. Build your equipment list and request a quote for your dates.
Shop by category01
Choose your equipment
Select products for your quote request.
02
Plan your rental
Tell us your dates and delivery requirements.
03
Receive your quote
We confirm availability and pricing with you.
Find your equipment
Shop by category
Video control & processing
Decimator Design
12G-CROSS 4K video converter
Key features
- Converter dimensions
- 106 × 130 × 31 mm
- DC power connection
- 5–32 V DC; centre-positive, locking DC connector
Overview
Connect HDMI and SDI equipment for presentations, livestreams and camera setups. The Decimator Design 12G-CROSS converts between HDMI and SDI and scales resolution and frame rate, supporting UHD and DCI 4K up to 60p. Select the source and output format using the built-in LCD and buttons. HDMI-to-SDI and SDI-to-HDMI conversion can run simultaneously with suitable routing. One scaler is shared between the outputs; the four SDI sockets operate in two pairs, not as four independent converters.
Specifications
- Converter dimensions
- 106 × 130 × 31 mm
Specifications
- Converter model
- Decimator Design 12G-CROSS; HDMI/SDI cross converter with scaler
- Maximum video format
- 3840 × 2160 UHD and 4096 × 2160 DCI 4K up to 60p via HDMI or 12G-SDI
- Video inputs
- 1 × HDMI Type A; 1 × SD/HD/3G/6G/12G-SDI (BNC)
- Video outputs and loop-through
- 1 × HDMI Type A; 4 × SDI (BNC) in two pairs. Output 1 loops the SDI input or mirrors Output 2; Output 2 carries the selected SDI, HDMI or scaler source.
- Scaling and routing
- One shared scaler for resolution and frame-rate conversion; selectable HDMI or SDI input. HDMI and SDI output sources can be selected separately.
- Synchronisation and control
- BNC genlock input; LCD and four buttons; USB for control and firmware updates
- DC power connection
- 5–32 V DC; centre-positive, locking DC connector
Documentation
Alternative and related equipment
You may also be interested in
The rental collection
Catalogue
228 items
All categories
Submitting an enquiry does not reserve equipment. Availability and final pricing are confirmed by our team.
Pincase 50 pins+springs 4 couplers
Pincase kit containing 50 pins and springs and 4 couplers.
Pincase 100 pins+springs 8 couplers 1 hammer 1 13mm rachet
Pincase kit containing 100 pins and springs, 8 couplers, 1 hammer and 1 ratchet (13 mm).
Pipe & drape baseplate pin – 10 cm
Baseplate pin with a length of 10 cm and a diameter of 45 mm, used to connect a pipe & drape upright to its baseplate. This listing is for one pin; the baseplate and upright are separate items. Select the pin length to suit the intended upright and setup.
Pipe & drape baseplate pin – 20 cm
Baseplate pin with a length of 20 cm and a diameter of 45 mm, used to connect a pipe & drape upright to its baseplate. This listing is for one pin; the baseplate and upright are separate items. Select the pin length to suit the intended upright and setup.
Pipe & drape baseplate pin – 40 cm
Baseplate pin with a length of 40 cm and a diameter of 45 mm, used to connect a pipe & drape upright to its baseplate. This listing is for one pin; the baseplate and upright are separate items. Select the pin length to suit the intended upright and setup. The Wentex manual specifies this pin with 60 × 60 or 80 × 80 cm baseplates, depending on the upright.
Pipe & drape baseplate – 45 × 45 cm
Baseplate measuring 45 × 45 cm for the base of a pipe & drape upright. Use a suitable baseplate pin to connect the upright. This listing is for one loose baseplate; pins, uprights, crossbars and curtains are separate items. The Wentex manual pairs this plate with a 20 cm pin and a 120–180 or 180–300 cm telescopic upright. It is not the specified baseplate for an 180–420 cm upright.
Pipe & drape crossbar – 90–120 cm
Telescopic crossbar with an adjustable length of 90–120 cm for hanging a curtain between pipe & drape uprights. This listing is for one crossbar; uprights, baseplates, pins and curtains are separate items.
Pipe & drape crossbar – 180–300 cm
Telescopic crossbar with an adjustable length of 180–300 cm for hanging a curtain between pipe & drape uprights. This listing is for one crossbar; uprights, baseplates, pins and curtains are separate items.
Pipe & drape upright – 120 cm
Fixed-height 120 cm upright for a low pipe & drape screen around a control position. This listing is for one upright; select the baseplate, pin, crossbar and curtain separately.
Pipe & drape upright – 180–420 cm
Telescopic pipe & drape upright with a height range of 180–420 cm for an adjustable curtain screen. This listing is for one upright; select the baseplate, pin, crossbar and curtain separately. For this height range, the Wentex manual specifies a 60 × 60 or 80 × 80 cm baseplate with a 40 cm pin; do not combine it with the 45 × 45 cm baseplate.
Power / 3-pin DMX hybrid 1,5m
Custom-assembled 1.5 m power and 3-pin DMX hybrid cable, using Adam Hall 4 STAR HYBRID POWER DMX 325 (K4HPD325) cable. Confirm the power connector type, connector genders and both end configurations before booking; powerCON or TRUE1 compatibility is not confirmed.
Power / 3-pin DMX hybrid 3m
Custom-assembled 3 m power and 3-pin DMX hybrid cable, using Adam Hall 4 STAR HYBRID POWER DMX 325 (K4HPD325) cable. Confirm the power connector type, connector genders and both end configurations before booking; powerCON or TRUE1 compatibility is not confirmed.
Rental quote
Your
quote request.
Choose your dates, review your selection by category and request a quote. We’ll confirm availability and any prices that still need checking.
No payment at this stage
Availability confirmed before booking
Delivery and setup requirements welcome