Event equipment rental
Your event.
The right equipment.
Truss, cables, screens and event styling. Build your equipment list and request a quote for your dates.
Shop by category01
Choose your equipment
Select products for your quote request.
02
Plan your rental
Tell us your dates and delivery requirements.
03
Receive your quote
We confirm availability and pricing with you.
Find your equipment
Shop by category
Effect machines
Haze 1200 Pro
SKU: FOS-HAZE-1200-PRO
Key features
- Power consumption
- 1200 W
- Mains voltage
- 220/240 V AC
Overview
Give light beams definition and create atmosphere for concerts, theatre and indoor events. The Haze 1200 Pro is a 1200 W haze machine with a 5 L tank and separate control of fan speed and haze output. Use the onboard display for a standalone setup, or integrate it into your lighting desk with two DMX channels.
Allow approximately 2.5 minutes for warm-up. The display warns when the fluid level is low. Place the unit on the floor in a dry indoor environment; its IP20 housing is not weatherproof. Haze fluid is available separately in a 5 L can below.
At the end of your event, set haze output to zero and keep the unit powered for 80-90 seconds so the self-cleaning cycle can finish before switching off. Download the user manual for setup, DMX operation and safe use.
Specifications
- Model
- Haze 1200 Pro
Technical
- Power consumption
- 1200 W
- Pre-heating time
- 2.5 min
- Tank capacity
- 5 L
- Control
- Onboard and DMX512
- DMX channels
- 2
- Mains voltage
- 220/240 V AC
- Mains frequency
- 50/60 Hz
- Protection rating
- IP20
- Installation
- Floor operation, indoors in a dry environment
Documentation
Frequently asked questions
How should the hazer be shut down?
Set haze output to zero and leave the power on for about 80–90 seconds for self-cleaning before switching off. Follow the manufacturer manual; use only indoors in a dry environment.
Recommended accessories
Select accessories separately. “Add both” also selects this item.
Haze Fluid - 5 L€14.00 · Sale price · incl. VAT
Alternative and related equipment
You may also be interested in
The rental collection
Catalogue
228 items
All categories
Submitting an enquiry does not reserve equipment. Availability and final pricing are confirmed by our team.
Pincase 50 pins+springs 4 couplers
Pincase kit containing 50 pins and springs and 4 couplers.
Pincase 100 pins+springs 8 couplers 1 hammer 1 13mm rachet
Pincase kit containing 100 pins and springs, 8 couplers, 1 hammer and 1 ratchet (13 mm).
Pipe & drape baseplate pin – 10 cm
Baseplate pin with a length of 10 cm and a diameter of 45 mm, used to connect a pipe & drape upright to its baseplate. This listing is for one pin; the baseplate and upright are separate items. Select the pin length to suit the intended upright and setup.
Pipe & drape baseplate pin – 20 cm
Baseplate pin with a length of 20 cm and a diameter of 45 mm, used to connect a pipe & drape upright to its baseplate. This listing is for one pin; the baseplate and upright are separate items. Select the pin length to suit the intended upright and setup.
Pipe & drape baseplate pin – 40 cm
Baseplate pin with a length of 40 cm and a diameter of 45 mm, used to connect a pipe & drape upright to its baseplate. This listing is for one pin; the baseplate and upright are separate items. Select the pin length to suit the intended upright and setup. The Wentex manual specifies this pin with 60 × 60 or 80 × 80 cm baseplates, depending on the upright.
Pipe & drape baseplate – 45 × 45 cm
Baseplate measuring 45 × 45 cm for the base of a pipe & drape upright. Use a suitable baseplate pin to connect the upright. This listing is for one loose baseplate; pins, uprights, crossbars and curtains are separate items. The Wentex manual pairs this plate with a 20 cm pin and a 120–180 or 180–300 cm telescopic upright. It is not the specified baseplate for an 180–420 cm upright.
Pipe & drape crossbar – 90–120 cm
Telescopic crossbar with an adjustable length of 90–120 cm for hanging a curtain between pipe & drape uprights. This listing is for one crossbar; uprights, baseplates, pins and curtains are separate items.
Pipe & drape crossbar – 180–300 cm
Telescopic crossbar with an adjustable length of 180–300 cm for hanging a curtain between pipe & drape uprights. This listing is for one crossbar; uprights, baseplates, pins and curtains are separate items.
Pipe & drape upright – 120 cm
Fixed-height 120 cm upright for a low pipe & drape screen around a control position. This listing is for one upright; select the baseplate, pin, crossbar and curtain separately.
Pipe & drape upright – 180–420 cm
Telescopic pipe & drape upright with a height range of 180–420 cm for an adjustable curtain screen. This listing is for one upright; select the baseplate, pin, crossbar and curtain separately. For this height range, the Wentex manual specifies a 60 × 60 or 80 × 80 cm baseplate with a 40 cm pin; do not combine it with the 45 × 45 cm baseplate.
Power / 3-pin DMX hybrid 1,5m
Custom-assembled 1.5 m power and 3-pin DMX hybrid cable, using Adam Hall 4 STAR HYBRID POWER DMX 325 (K4HPD325) cable. Confirm the power connector type, connector genders and both end configurations before booking; powerCON or TRUE1 compatibility is not confirmed.
Power / 3-pin DMX hybrid 3m
Custom-assembled 3 m power and 3-pin DMX hybrid cable, using Adam Hall 4 STAR HYBRID POWER DMX 325 (K4HPD325) cable. Confirm the power connector type, connector genders and both end configurations before booking; powerCON or TRUE1 compatibility is not confirmed.
Rental quote
Your
quote request.
Choose your dates, review your selection by category and request a quote. We’ll confirm availability and any prices that still need checking.
No payment at this stage
Availability confirmed before booking
Delivery and setup requirements welcome