Event equipment rental
Your event.
The right equipment.
Truss, cables, screens and event styling. Build your equipment list and request a quote for your dates.
Shop by category01
Choose your equipment
Select products for your quote request.
02
Plan your rental
Tell us your dates and delivery requirements.
03
Receive your quote
We confirm availability and pricing with you.
Find your equipment
Shop by category
Effect machines
Haze 1200 Pro
SKU: FOS-HAZE-1200-PRO
Key features
- Power consumption
- 1200 W
- Mains voltage
- 220/240 V AC
Overview
Give light beams definition and create atmosphere for concerts, theatre and indoor events. The Haze 1200 Pro is a 1200 W haze machine with a 5 L tank and separate control of fan speed and haze output. Use the onboard display for a standalone setup, or integrate it into your lighting desk with two DMX channels.
Allow approximately 2.5 minutes for warm-up. The display warns when the fluid level is low. Place the unit on the floor in a dry indoor environment; its IP20 housing is not weatherproof. Haze fluid is available separately in a 5 L can below.
At the end of your event, set haze output to zero and keep the unit powered for 80-90 seconds so the self-cleaning cycle can finish before switching off. Download the user manual for setup, DMX operation and safe use.
Specifications
- Model
- Haze 1200 Pro
Technical
- Power consumption
- 1200 W
- Pre-heating time
- 2.5 min
- Tank capacity
- 5 L
- Control
- Onboard and DMX512
- DMX channels
- 2
- Mains voltage
- 220/240 V AC
- Mains frequency
- 50/60 Hz
- Protection rating
- IP20
- Installation
- Floor operation, indoors in a dry environment
Documentation
Frequently asked questions
How should the hazer be shut down?
Recommended accessories
Select accessories separately. “Add both” also selects this item.
The rental collection
Catalogue
228 items
All categories
Layher vertical diagonal brace – 103.5 × 100 cm
Individual Layher Allround vertical diagonal for a bay length × lift height of 103.5 × 100 cm. These are bay dimensions, not the diagonal tube length; this is a fixed-size component, not an adjustable brace. The 103.5 cm working designation has not yet been matched exactly to the manufacturer’s 1.03/1.04 m family. Technical identification must be confirmed before use. Transport, assembly, dismantling and structural design are not included.
Layher vertical diagonal brace – 103.5 × 150 cm
Individual Layher Allround vertical diagonal for a bay length × lift height of 103.5 × 150 cm. These are bay dimensions, not the diagonal tube length; this is a fixed-size component, not an adjustable brace. The 103.5 cm working designation has not yet been matched exactly to the manufacturer’s 1.03/1.04 m family. Technical identification must be confirmed before use. Transport, assembly, dismantling and structural design are not included.
Layher vertical diagonal brace – 103.5 × 200 cm
Individual Layher Allround vertical diagonal for a bay length × lift height of 103.5 × 200 cm. These are bay dimensions, not the diagonal tube length; this is a fixed-size component, not an adjustable brace. The 103.5 cm working designation has not yet been matched exactly to the manufacturer’s 1.03/1.04 m family. Technical identification must be confirmed before use. Transport, assembly, dismantling and structural design are not included.
Layher vertical diagonal brace – 207 × 50 cm
Individual Layher Allround vertical diagonal for a bay length × lift height of 207 × 50 cm. These are bay dimensions, not the diagonal tube length; this is a fixed-size component, not an adjustable brace. Transport, assembly, dismantling and structural design are not included.
Layher vertical diagonal brace – 207 × 100 cm
Individual Layher Allround vertical diagonal for a bay length × lift height of 207 × 100 cm. These are bay dimensions, not the diagonal tube length; this is a fixed-size component, not an adjustable brace. Transport, assembly, dismantling and structural design are not included.
Layher vertical diagonal brace – 207 × 150 cm
Individual Layher Allround vertical diagonal for a bay length × lift height of 207 × 150 cm. These are bay dimensions, not the diagonal tube length; this is a fixed-size component, not an adjustable brace. Transport, assembly, dismantling and structural design are not included.
Layher vertical diagonal brace – 207 × 200 cm
Individual Layher Allround vertical diagonal for a bay length × lift height of 207 × 200 cm. These are bay dimensions, not the diagonal tube length; this is a fixed-size component, not an adjustable brace. Transport, assembly, dismantling and structural design are not included.
LD Systems STINGER 8 A G3 active speaker
A compact powered speaker for presentations, background music and small event sound. The 8-inch woofer and 1-inch compression driver are driven by a built-in 300 W RMS Class D amplifier. Two independently controlled mic/line inputs make a simple setup possible, while an XLR mono mix output can feed another powered speaker. Choose full-range operation, use it above a suitable subwoofer, or select the monitor preset for close-range monitoring. This listing is for one speaker, not a complete PA package.
LD Systems STINGER 12 A G3 active speaker
Bring clear speech, music or stage monitoring to your event with this active 12-inch two-way PA speaker. Its built-in Class D amplifier provides 500 W RMS audio output, while the 90° × 50° coverage and four DSP presets support standalone, satellite and floor-monitor setups. Connect a mixer or another suitable line-level source directly; a separate power amplifier is not required. This listing is for one loudspeaker, not a complete PA system.
LD Systems STINGER SUB 18 A G3 active subwoofer
Add deep bass to a DJ set, live performance or event PA with this active 18-inch bass-reflex subwoofer. The built-in Class D amplifier delivers 800 W RMS, while DynX DSP provides protection and selectable low-pass presets. Combine it with suitable full-range top speakers and a line-level audio source; this listing is for one subwoofer, not a complete sound system. Plan transport and safe handling around its 42.6 kg cabinet weight.
LED PAR 7x20w
Add colour to walls, scenery and stage backdrops with this LED PAR. Use it for colour accents at a party, ambient lighting at a wedding or to dress a presentation space. The fixture has seven 20 W RGBCLA LEDs and combines multiple LED colours in a single unit. Use one fixture for a local accent or several to spread coloured lighting across a wall or backdrop. It provides a fixed lighting direction for illuminating surfaces rather than a moving-light effect. The number of fixtures required depends on the surface, placement distance and ambient light. Tell us what you want to illuminate when enquiring so we can help plan the arrangement.
Ledwash Zoom
Compact moving-head wash with seven 40 W RGBW LEDs and motorised zoom, for broad colour washes or a tighter beam on indoor stages and dance floors. Pan and tilt let you reposition the light from your DMX desk. Our rental fixture has TRUE1 power input and output, 3-pin DMX connections and one trigger clamp.
Rental quote
Your
quote request.
Choose your dates, review your selection by category and request a quote. We’ll confirm availability and any prices that still need checking.
No payment at this stage
Availability confirmed before booking
Delivery and setup requirements welcome