Pincase kit containing 50 pins and springs and 4 couplers.

Pincase kit containing 100 pins and springs, 8 couplers, 1 hammer and 1 ratchet (13 mm).

Baseplate pin with a length of 10 cm and a diameter of 45 mm, used to connect a pipe & drape upright to its baseplate. This listing is for one pin; the baseplate and upright are separate items. Select the pin length to suit the intended upright and setup.

Baseplate pin with a length of 20 cm and a diameter of 45 mm, used to connect a pipe & drape upright to its baseplate. This listing is for one pin; the baseplate and upright are separate items. Select the pin length to suit the intended upright and setup.

Baseplate pin with a length of 40 cm and a diameter of 45 mm, used to connect a pipe & drape upright to its baseplate. This listing is for one pin; the baseplate and upright are separate items. Select the pin length to suit the intended upright and setup. The Wentex manual specifies this pin with 60 × 60 or 80 × 80 cm baseplates, depending on the upright.

Baseplate measuring 45 × 45 cm for the base of a pipe & drape upright. Use a suitable baseplate pin to connect the upright. This listing is for one loose baseplate; pins, uprights, crossbars and curtains are separate items. The Wentex manual pairs this plate with a 20 cm pin and a 120–180 or 180–300 cm telescopic upright. It is not the specified baseplate for an 180–420 cm upright.

Telescopic crossbar with an adjustable length of 90–120 cm for hanging a curtain between pipe & drape uprights. This listing is for one crossbar; uprights, baseplates, pins and curtains are separate items.

Telescopic crossbar with an adjustable length of 180–300 cm for hanging a curtain between pipe & drape uprights. This listing is for one crossbar; uprights, baseplates, pins and curtains are separate items.

Fixed-height 120 cm upright for a low pipe & drape screen around a control position. This listing is for one upright; select the baseplate, pin, crossbar and curtain separately.

Telescopic pipe & drape upright with a height range of 180–420 cm for an adjustable curtain screen. This listing is for one upright; select the baseplate, pin, crossbar and curtain separately. For this height range, the Wentex manual specifies a 60 × 60 or 80 × 80 cm baseplate with a 40 cm pin; do not combine it with the 45 × 45 cm baseplate.

Custom-assembled 1.5 m power and 3-pin DMX hybrid cable, using Adam Hall 4 STAR HYBRID POWER DMX 325 (K4HPD325) cable. Confirm the power connector type, connector genders and both end configurations before booking; powerCON or TRUE1 compatibility is not confirmed.

Custom-assembled 3 m power and 3-pin DMX hybrid cable, using Adam Hall 4 STAR HYBRID POWER DMX 325 (K4HPD325) cable. Confirm the power connector type, connector genders and both end configurations before booking; powerCON or TRUE1 compatibility is not confirmed.