Event equipment rental
Your event.
The right equipment.
Truss, cables, screens and event styling. Build your equipment list and request a quote for your dates.
Shop by category01
Choose your equipment
Select products for your quote request.
02
Plan your rental
Tell us your dates and delivery requirements.
03
Receive your quote
We confirm availability and pricing with you.
Find your equipment
Shop by category
Speakers
LD Systems
STINGER 12 A G3 active speaker
SKU: LDEB122AG3
Key features
- Dimensions (W × H × D)
- 390 × 627 × 377 mm
- Weight
- 20.1 kg
Overview
Bring clear speech, music or stage monitoring to your event with this active 12-inch two-way PA speaker. Its built-in Class D amplifier provides 500 W RMS audio output, while the 90° × 50° coverage and four DSP presets support standalone, satellite and floor-monitor setups. Connect a mixer or another suitable line-level source directly; a separate power amplifier is not required. This listing is for one loudspeaker, not a complete PA system.
Specifications
- Model
- STINGER 12 A G3 / LDEB122AG3; active third-generation model
- Dimensions (W × H × D)
- 390 × 627 × 377 mm
- Weight
- 20.1 kg
Specifications
- Drivers
- 12-inch woofer and 1-inch BMS high-frequency driver
- Audio amplifier output
- 500 W RMS / 1000 W peak; Class D
- Maximum sound pressure
- 131 dB peak SPL (current manufacturer specification)
- Frequency response
- 58 Hz–20 kHz
- Coverage
- 90° horizontal × 50° vertical
- DSP presets
- Full-Range, Satellite (90 Hz high-pass), Monitor and Flat
- Audio inputs
- 2 balanced XLR/6.3 mm jack combo inputs; independent gain and mic/line selection
- Audio output
- 1 balanced male XLR mono mix output (channels 1 + 2)
- Mains connection
- Blue powerCON-type locking power input; not TRUE1
- Mains supply and consumption
- 100–120 / 200–240 V AC, 50–60 Hz; maximum 600 VA. Audio output watts are not mains consumption.
- Cabinet and positioning
- 15 mm birch plywood, polyurea coating; 36 mm dual-tilt pole socket (0°/5°); 54° monitor angle
Documentation
Frequently asked questions
Can I use it without a subwoofer?
Yes. Select Full-Range for standalone speech or music. Add a suitable subwoofer when the programme needs more low-frequency output; choose Satellite and coordinate the crossover. Audience size alone does not determine a suitable system.
Which source can I connect?
Use LINE for a mixer, DJ mixer or keyboard output. MIC is for a suitable directly connected microphone. Phones and laptops need an appropriate audio interface, mixer or correctly wired adapter; do not connect an external amplifier speaker output. Start with channel gains turned down.
Can it work as a floor monitor?
Yes. Place the cabinet on its monitor side and select Monitor. The 54° angle directs sound towards the performer. Flat provides a linear response for external EQ; it is not restricted to speech.
Are stands and cables included?
This is a single-speaker listing. Confirm the required mains lead, signal cables, stand or pole separately when planning the setup; no accessories, cover or flightcase are promised here. Match the power lead to the blue locking inlet, not TRUE1.
How should I position it safely?
Use a stable stand rated for the 20.1 kg cabinet, or a stable floor-monitor position. Keep the loudspeaker dry and protect hearing. Suspended installation requires suitable rated hardware and a qualified installer; mounting accessories are separate.
Alternative and related equipment
You may also be interested in
The rental collection
Catalogue
228 items
All categories
Submitting an enquiry does not reserve equipment. Availability and final pricing are confirmed by our team.
Pincase 50 pins+springs 4 couplers
Pincase kit containing 50 pins and springs and 4 couplers.
Pincase 100 pins+springs 8 couplers 1 hammer 1 13mm rachet
Pincase kit containing 100 pins and springs, 8 couplers, 1 hammer and 1 ratchet (13 mm).
Pipe & drape baseplate pin – 10 cm
Baseplate pin with a length of 10 cm and a diameter of 45 mm, used to connect a pipe & drape upright to its baseplate. This listing is for one pin; the baseplate and upright are separate items. Select the pin length to suit the intended upright and setup.
Pipe & drape baseplate pin – 20 cm
Baseplate pin with a length of 20 cm and a diameter of 45 mm, used to connect a pipe & drape upright to its baseplate. This listing is for one pin; the baseplate and upright are separate items. Select the pin length to suit the intended upright and setup.
Pipe & drape baseplate pin – 40 cm
Baseplate pin with a length of 40 cm and a diameter of 45 mm, used to connect a pipe & drape upright to its baseplate. This listing is for one pin; the baseplate and upright are separate items. Select the pin length to suit the intended upright and setup. The Wentex manual specifies this pin with 60 × 60 or 80 × 80 cm baseplates, depending on the upright.
Pipe & drape baseplate – 45 × 45 cm
Baseplate measuring 45 × 45 cm for the base of a pipe & drape upright. Use a suitable baseplate pin to connect the upright. This listing is for one loose baseplate; pins, uprights, crossbars and curtains are separate items. The Wentex manual pairs this plate with a 20 cm pin and a 120–180 or 180–300 cm telescopic upright. It is not the specified baseplate for an 180–420 cm upright.
Pipe & drape crossbar – 90–120 cm
Telescopic crossbar with an adjustable length of 90–120 cm for hanging a curtain between pipe & drape uprights. This listing is for one crossbar; uprights, baseplates, pins and curtains are separate items.
Pipe & drape crossbar – 180–300 cm
Telescopic crossbar with an adjustable length of 180–300 cm for hanging a curtain between pipe & drape uprights. This listing is for one crossbar; uprights, baseplates, pins and curtains are separate items.
Pipe & drape upright – 120 cm
Fixed-height 120 cm upright for a low pipe & drape screen around a control position. This listing is for one upright; select the baseplate, pin, crossbar and curtain separately.
Pipe & drape upright – 180–420 cm
Telescopic pipe & drape upright with a height range of 180–420 cm for an adjustable curtain screen. This listing is for one upright; select the baseplate, pin, crossbar and curtain separately. For this height range, the Wentex manual specifies a 60 × 60 or 80 × 80 cm baseplate with a 40 cm pin; do not combine it with the 45 × 45 cm baseplate.
Power / 3-pin DMX hybrid 1,5m
Custom-assembled 1.5 m power and 3-pin DMX hybrid cable, using Adam Hall 4 STAR HYBRID POWER DMX 325 (K4HPD325) cable. Confirm the power connector type, connector genders and both end configurations before booking; powerCON or TRUE1 compatibility is not confirmed.
Power / 3-pin DMX hybrid 3m
Custom-assembled 3 m power and 3-pin DMX hybrid cable, using Adam Hall 4 STAR HYBRID POWER DMX 325 (K4HPD325) cable. Confirm the power connector type, connector genders and both end configurations before booking; powerCON or TRUE1 compatibility is not confirmed.
Rental quote
Your
quote request.
Choose your dates, review your selection by category and request a quote. We’ll confirm availability and any prices that still need checking.
No payment at this stage
Availability confirmed before booking
Delivery and setup requirements welcome