Speakers

LD Systems

STINGER 12 A G3 active speaker

SKU: LDEB122AG3

STINGER 12 A G3 — Front three-quarter view

1 / 4

STINGER 12 A G3 — Rear three-quarter view

STINGER 12 A G3 — Floor-monitor position, front and pole sockets

Key features

Dimensions (W × H × D): 390 × 627 × 377 mm
Weight: 20.1 kg

From€35.00Rental price · per day · excl. VAT

Review quote selection →

Overview

Bring clear speech, music or stage monitoring to your event with this active 12-inch two-way PA speaker. Its built-in Class D amplifier provides 500 W RMS audio output, while the 90° × 50° coverage and four DSP presets support standalone, satellite and floor-monitor setups. Connect a mixer or another suitable line-level source directly; a separate power amplifier is not required. This listing is for one loudspeaker, not a complete PA system.

Specifications

Model: STINGER 12 A G3 / LDEB122AG3; active third-generation model
Dimensions (W × H × D): 390 × 627 × 377 mm
Weight: 20.1 kg

Specifications

Drivers: 12-inch woofer and 1-inch BMS high-frequency driver
Audio amplifier output: 500 W RMS / 1000 W peak; Class D
Maximum sound pressure: 131 dB peak SPL (current manufacturer specification)
Frequency response: 58 Hz–20 kHz
Coverage: 90° horizontal × 50° vertical
DSP presets: Full-Range, Satellite (90 Hz high-pass), Monitor and Flat
Audio inputs: 2 balanced XLR/6.3 mm jack combo inputs; independent gain and mic/line selection
Audio output: 1 balanced male XLR mono mix output (channels 1 + 2)
Mains connection: Blue powerCON-type locking power input; not TRUE1
Mains supply and consumption: 100–120 / 200–240 V AC, 50–60 Hz; maximum 600 VA. Audio output watts are not mains consumption.
Cabinet and positioning: 15 mm birch plywood, polyurea coating; 36 mm dual-tilt pole socket (0°/5°); 54° monitor angle

Documentation

STINGER G3 active loudspeakers — user manual (includes 12 A G3)PDF

Frequently asked questions

Can I use it without a subwoofer?

Yes. Select Full-Range for standalone speech or music. Add a suitable subwoofer when the programme needs more low-frequency output; choose Satellite and coordinate the crossover. Audience size alone does not determine a suitable system.

Which source can I connect?

Use LINE for a mixer, DJ mixer or keyboard output. MIC is for a suitable directly connected microphone. Phones and laptops need an appropriate audio interface, mixer or correctly wired adapter; do not connect an external amplifier speaker output. Start with channel gains turned down.

Can it work as a floor monitor?

Yes. Place the cabinet on its monitor side and select Monitor. The 54° angle directs sound towards the performer. Flat provides a linear response for external EQ; it is not restricted to speech.

Are stands and cables included?

This is a single-speaker listing. Confirm the required mains lead, signal cables, stand or pole separately when planning the setup; no accessories, cover or flightcase are promised here. Match the power lead to the blue locking inlet, not TRUE1.

How should I position it safely?

Use a stable stand rated for the 20.1 kg cabinet, or a stable floor-monitor position. Keep the loudspeaker dry and protect hearing. Suspended installation requires suitable rated hardware and a qualified installer; mounting accessories are separate.

The rental collection

Catalogue

228 items

Search in English or Dutch, including familiar equipment names and model numbers.

Submitting an enquiry does not reserve equipment. Availability and final pricing are confirmed by our team.

Layher ledger – 257 cm

Individual Layher Allround ledger with a 257 cm working-size designation. This is an ordinary ledger, not a U-ledger, reinforced ledger or event deck bearer. Transport, assembly, dismantling and structural design are not included.

Productafbeelding — Layher spindel 20 cm

Layher spindle – 20 cm

Steel base jack with a 20 cm spindle and a 150 × 150 mm base plate for levelling a Layher Allround scaffold. Spindle length is not a permissible extension height. Rental per piece per day, excluding 21% VAT. No complete structure or load rating is represented. Transport, assembly, dismantling and structural design are not included.

Layher spindle – 40 cm

Steel base jack with a 40 cm spindle and a 150 × 150 mm base plate for levelling a Layher Allround scaffold. Spindle length is not a permissible extension height. Rental per piece per day, excluding 21% VAT. No complete structure or load rating is represented. Transport, assembly, dismantling and structural design are not included.

Layher spindle – 60 cm

Steel base jack with a 60 cm spindle and a 150 × 150 mm base plate for levelling a Layher Allround scaffold. Spindle length is not a permissible extension height. Rental per piece per day, excluding 21% VAT. No complete structure or load rating is represented. Transport, assembly, dismantling and structural design are not included.

Layher staander 50 cm — Variant ter beoordeling — Layher 2617050

Layher upright – 50 cm

Requested steel Layher Allround standard, 50 cm working length, with rosettes at 50 cm intervals. Lightweight/conventional generation and with/without spigot execution remain unconfirmed; this is a working listing, not a verified stock specification. Rental per piece per day, excluding 21% VAT. No complete structure or load rating is represented. Transport, assembly, dismantling and structural design are not included.

Layher staander 100 cm — Variant ter beoordeling — Layher 2617100

Layher upright – 100 cm

Requested steel Layher Allround standard, 100 cm working length, with rosettes at 50 cm intervals. Lightweight/conventional generation and with/without spigot execution remain unconfirmed; this is a working listing, not a verified stock specification. Rental per piece per day, excluding 21% VAT. No complete structure or load rating is represented. Transport, assembly, dismantling and structural design are not included.

Layher staander 150 cm — Variant ter beoordeling — Layher 2617150

Layher upright – 150 cm

Requested steel Layher Allround standard, 150 cm working length, with rosettes at 50 cm intervals. Lightweight/conventional generation and with/without spigot execution remain unconfirmed; this is a working listing, not a verified stock specification. Rental per piece per day, excluding 21% VAT. No complete structure or load rating is represented. Transport, assembly, dismantling and structural design are not included.

Layher staander 200 cm — Variant ter beoordeling — Layher 2617200

Layher upright – 200 cm

Requested steel Layher Allround standard, 200 cm working length, with rosettes at 50 cm intervals. Lightweight/conventional generation and with/without spigot execution remain unconfirmed; this is a working listing, not a verified stock specification. Rental per piece per day, excluding 21% VAT. No complete structure or load rating is represented. Transport, assembly, dismantling and structural design are not included.

Layher staander 250 cm — Variant ter beoordeling — Layher 2617250

Layher upright – 250 cm

Requested steel Layher Allround standard, 250 cm working length, with rosettes at 50 cm intervals. Lightweight/conventional generation and with/without spigot execution remain unconfirmed; this is a working listing, not a verified stock specification. Rental per piece per day, excluding 21% VAT. No complete structure or load rating is represented. Transport, assembly, dismantling and structural design are not included.

Layher staander 300 cm — Variant ter beoordeling — Layher 2617300

Layher upright – 300 cm

Requested steel Layher Allround standard, 300 cm working length, with rosettes at 50 cm intervals. Lightweight/conventional generation and with/without spigot execution remain unconfirmed; this is a working listing, not a verified stock specification. Rental per piece per day, excluding 21% VAT. No complete structure or load rating is represented. Transport, assembly, dismantling and structural design are not included.

Layher staander 400 cm — Variant ter beoordeling — Layher 2617400

Layher upright – 400 cm

Requested steel Layher Allround standard, 400 cm working length, with rosettes at 50 cm intervals. Lightweight/conventional generation and with/without spigot execution remain unconfirmed; this is a working listing, not a verified stock specification. Rental per piece per day, excluding 21% VAT. No complete structure or load rating is represented. Transport, assembly, dismantling and structural design are not included.

Layher verticale diagonaal 103,5 × 50 cm — Variant ter beoordeling — Layher 2680104

Layher vertical diagonal brace – 103.5 × 50 cm

Individual Layher Allround vertical diagonal for a bay length × lift height of 103.5 × 50 cm. These are bay dimensions, not the diagonal tube length; this is a fixed-size component, not an adjustable brace. The 103.5 cm working designation has not yet been matched exactly to the manufacturer’s 1.03/1.04 m family. Technical identification must be confirmed before use. Transport, assembly, dismantling and structural design are not included.

Your event.
The right equipment.

Shop by category

STINGER 12 A G3 active speaker

Key features

Overview