some.rent
NL EN Excl. VAT Incl. VAT
Quote list 0

← Back to results

Speakers

LD Systems

STINGER 8 A G3 active speaker

SKU: LDEB82AG3

STINGER 8 A G3 — front three-quarter viewEnlarge image
1 / 6
STINGER 8 A G3 — front three-quarter viewSTINGER 8 A G3 — rear three-quarter viewSTINGER 8 A G3 — front viewSTINGER 8 A G3 — rear connections and controlsSTINGER 8 A G3 — horizontal rear viewSTINGER 8 A G3 — horizontal front view and pole sockets

Key features

Cabinet dimensions
270 × 457 × 290 mm (width × height × depth)
Cabinet weight
10.5 kg according to the manufacturer and user manual, excluding transport accessories
Power supply and consumption
100–120 / 200–240 V AC, 50–60 Hz, automatic switching; maximum consumption 300 VA (manual)

From€30.00Rental price · per day · excl. VAT

Review quote selection →

Overview

A compact powered speaker for presentations, background music and small event sound. The 8-inch woofer and 1-inch compression driver are driven by a built-in 300 W RMS Class D amplifier. Two independently controlled mic/line inputs make a simple setup possible, while an XLR mono mix output can feed another powered speaker. Choose full-range operation, use it above a suitable subwoofer, or select the monitor preset for close-range monitoring. This listing is for one speaker, not a complete PA package.

Specifications

Cabinet dimensions
270 × 457 × 290 mm (width × height × depth)
Cabinet weight
10.5 kg according to the manufacturer and user manual, excluding transport accessories

Specifications

Model and drivers
LDEB82AG3; active 8-inch / 1-inch two-way bass-reflex loudspeaker
Amplifier output
Class D: 300 W RMS / 600 W peak audio output; not mains consumption
Frequency response and coverage
70 Hz–20 kHz; nominal coverage 90° horizontal × 50° vertical
Audio connections
2 balanced XLR / 6.3 mm jack combo mic/line inputs, each with gain and mic/line selection; 1 balanced XLR mono mix output
DSP presets
Full-range, Satellite (90 Hz high-pass), Monitor and Flat; DynX DSP with multiband limiting
Mains input
Blue powerCON input; no mains link output. Use a matching powerCON cable, not TRUE1
Power supply and consumption
100–120 / 200–240 V AC, 50–60 Hz, automatic switching; maximum consumption 300 VA (manual)
Cabinet and mounting
12 mm birch plywood with polyurea finish; 36 mm Dual-Tilt pole sockets for 0° or 5° tilt; M10 mounting points

Documentation

Frequently asked questions

Do I need a separate amplifier?
No: amplification is built in. Connect a line-level mixer or playback source with the input set to LINE, or a suitable microphone with MIC selected. Turn the channel gain down before connecting, then raise it gradually.
Which preset should I choose?
Use FULL-RANGE without a subwoofer. SATELLITE adds a 90 Hz high-pass for use with a suitably aligned subwoofer. MONITOR adjusts the response for monitoring. FLAT is a linear DSP setting for external equalisation, not a dedicated speech preset.
Can I connect another speaker?
The XLR LINE OUT MONO MIX carries the combined signal from both input channels. It can feed a suitable line input on another powered speaker or an amplifier. It is not a powered output for a passive loudspeaker.
What should I arrange for setup and transport?
Arrange a suitable stable stand or pole where needed, a matching mains lead, audio cables and transport protection. No accessory package is specified here. Keep ventilation clear and protect the speaker from rain and splashes. Suspended installation requires suitable rated mounting hardware and competent rigging.
Is a subwoofer useful for music?
For bass-heavy DJ material, add a suitable subwoofer rather than expecting a compact 8-inch cabinet to provide deep bass on its own. Required system size depends on the room, audience layout and listening level; no fixed audience capacity is guaranteed.