Speakers

LD Systems

STINGER 8 A G3 active speaker

SKU: LDEB82AG3

STINGER 8 A G3 — front three-quarter view

1 / 6

STINGER 8 A G3 — rear three-quarter view

STINGER 8 A G3 — rear connections and controls

STINGER 8 A G3 — horizontal front view and pole sockets

Key features

Cabinet dimensions: 270 × 457 × 290 mm (width × height × depth)
Cabinet weight: 10.5 kg according to the manufacturer and user manual, excluding transport accessories
Power supply and consumption: 100–120 / 200–240 V AC, 50–60 Hz, automatic switching; maximum consumption 300 VA (manual)

From€30.00Rental price · per day · excl. VAT

Review quote selection →

Overview

A compact powered speaker for presentations, background music and small event sound. The 8-inch woofer and 1-inch compression driver are driven by a built-in 300 W RMS Class D amplifier. Two independently controlled mic/line inputs make a simple setup possible, while an XLR mono mix output can feed another powered speaker. Choose full-range operation, use it above a suitable subwoofer, or select the monitor preset for close-range monitoring. This listing is for one speaker, not a complete PA package.

Specifications

Cabinet dimensions: 270 × 457 × 290 mm (width × height × depth)
Cabinet weight: 10.5 kg according to the manufacturer and user manual, excluding transport accessories

Specifications

Model and drivers: LDEB82AG3; active 8-inch / 1-inch two-way bass-reflex loudspeaker
Amplifier output: Class D: 300 W RMS / 600 W peak audio output; not mains consumption
Frequency response and coverage: 70 Hz–20 kHz; nominal coverage 90° horizontal × 50° vertical
Audio connections: 2 balanced XLR / 6.3 mm jack combo mic/line inputs, each with gain and mic/line selection; 1 balanced XLR mono mix output
DSP presets: Full-range, Satellite (90 Hz high-pass), Monitor and Flat; DynX DSP with multiband limiting
Mains input: Blue powerCON input; no mains link output. Use a matching powerCON cable, not TRUE1
Power supply and consumption: 100–120 / 200–240 V AC, 50–60 Hz, automatic switching; maximum consumption 300 VA (manual)
Cabinet and mounting: 12 mm birch plywood with polyurea finish; 36 mm Dual-Tilt pole sockets for 0° or 5° tilt; M10 mounting points

Documentation

STINGER G3 active loudspeakers — user manualPDF

Frequently asked questions

Do I need a separate amplifier?

No: amplification is built in. Connect a line-level mixer or playback source with the input set to LINE, or a suitable microphone with MIC selected. Turn the channel gain down before connecting, then raise it gradually.

Which preset should I choose?

Use FULL-RANGE without a subwoofer. SATELLITE adds a 90 Hz high-pass for use with a suitably aligned subwoofer. MONITOR adjusts the response for monitoring. FLAT is a linear DSP setting for external equalisation, not a dedicated speech preset.

Can I connect another speaker?

The XLR LINE OUT MONO MIX carries the combined signal from both input channels. It can feed a suitable line input on another powered speaker or an amplifier. It is not a powered output for a passive loudspeaker.

What should I arrange for setup and transport?

Arrange a suitable stable stand or pole where needed, a matching mains lead, audio cables and transport protection. No accessory package is specified here. Keep ventilation clear and protect the speaker from rain and splashes. Suspended installation requires suitable rated mounting hardware and competent rigging.

Is a subwoofer useful for music?

For bass-heavy DJ material, add a suitable subwoofer rather than expecting a compact 8-inch cabinet to provide deep bass on its own. Required system size depends on the room, audience layout and listening level; no fixed audience capacity is guaranteed.

The rental collection

Catalogue

228 items

Search in English or Dutch, including familiar equipment names and model numbers.

Submitting an enquiry does not reserve equipment. Availability and final pricing are confirmed by our team.

Layher ledger – 257 cm

Individual Layher Allround ledger with a 257 cm working-size designation. This is an ordinary ledger, not a U-ledger, reinforced ledger or event deck bearer. Transport, assembly, dismantling and structural design are not included.

Productafbeelding — Layher spindel 20 cm

Layher spindle – 20 cm

Steel base jack with a 20 cm spindle and a 150 × 150 mm base plate for levelling a Layher Allround scaffold. Spindle length is not a permissible extension height. Rental per piece per day, excluding 21% VAT. No complete structure or load rating is represented. Transport, assembly, dismantling and structural design are not included.

Layher spindle – 40 cm

Steel base jack with a 40 cm spindle and a 150 × 150 mm base plate for levelling a Layher Allround scaffold. Spindle length is not a permissible extension height. Rental per piece per day, excluding 21% VAT. No complete structure or load rating is represented. Transport, assembly, dismantling and structural design are not included.

Layher spindle – 60 cm

Steel base jack with a 60 cm spindle and a 150 × 150 mm base plate for levelling a Layher Allround scaffold. Spindle length is not a permissible extension height. Rental per piece per day, excluding 21% VAT. No complete structure or load rating is represented. Transport, assembly, dismantling and structural design are not included.

Layher staander 50 cm — Variant ter beoordeling — Layher 2617050

Layher upright – 50 cm

Requested steel Layher Allround standard, 50 cm working length, with rosettes at 50 cm intervals. Lightweight/conventional generation and with/without spigot execution remain unconfirmed; this is a working listing, not a verified stock specification. Rental per piece per day, excluding 21% VAT. No complete structure or load rating is represented. Transport, assembly, dismantling and structural design are not included.

Layher staander 100 cm — Variant ter beoordeling — Layher 2617100

Layher upright – 100 cm

Requested steel Layher Allround standard, 100 cm working length, with rosettes at 50 cm intervals. Lightweight/conventional generation and with/without spigot execution remain unconfirmed; this is a working listing, not a verified stock specification. Rental per piece per day, excluding 21% VAT. No complete structure or load rating is represented. Transport, assembly, dismantling and structural design are not included.

Layher staander 150 cm — Variant ter beoordeling — Layher 2617150

Layher upright – 150 cm

Requested steel Layher Allround standard, 150 cm working length, with rosettes at 50 cm intervals. Lightweight/conventional generation and with/without spigot execution remain unconfirmed; this is a working listing, not a verified stock specification. Rental per piece per day, excluding 21% VAT. No complete structure or load rating is represented. Transport, assembly, dismantling and structural design are not included.

Layher staander 200 cm — Variant ter beoordeling — Layher 2617200

Layher upright – 200 cm

Requested steel Layher Allround standard, 200 cm working length, with rosettes at 50 cm intervals. Lightweight/conventional generation and with/without spigot execution remain unconfirmed; this is a working listing, not a verified stock specification. Rental per piece per day, excluding 21% VAT. No complete structure or load rating is represented. Transport, assembly, dismantling and structural design are not included.

Layher staander 250 cm — Variant ter beoordeling — Layher 2617250

Layher upright – 250 cm

Requested steel Layher Allround standard, 250 cm working length, with rosettes at 50 cm intervals. Lightweight/conventional generation and with/without spigot execution remain unconfirmed; this is a working listing, not a verified stock specification. Rental per piece per day, excluding 21% VAT. No complete structure or load rating is represented. Transport, assembly, dismantling and structural design are not included.

Layher staander 300 cm — Variant ter beoordeling — Layher 2617300

Layher upright – 300 cm

Requested steel Layher Allround standard, 300 cm working length, with rosettes at 50 cm intervals. Lightweight/conventional generation and with/without spigot execution remain unconfirmed; this is a working listing, not a verified stock specification. Rental per piece per day, excluding 21% VAT. No complete structure or load rating is represented. Transport, assembly, dismantling and structural design are not included.

Layher staander 400 cm — Variant ter beoordeling — Layher 2617400

Layher upright – 400 cm

Requested steel Layher Allround standard, 400 cm working length, with rosettes at 50 cm intervals. Lightweight/conventional generation and with/without spigot execution remain unconfirmed; this is a working listing, not a verified stock specification. Rental per piece per day, excluding 21% VAT. No complete structure or load rating is represented. Transport, assembly, dismantling and structural design are not included.

Layher verticale diagonaal 103,5 × 50 cm — Variant ter beoordeling — Layher 2680104

Layher vertical diagonal brace – 103.5 × 50 cm

Individual Layher Allround vertical diagonal for a bay length × lift height of 103.5 × 50 cm. These are bay dimensions, not the diagonal tube length; this is a fixed-size component, not an adjustable brace. The 103.5 cm working designation has not yet been matched exactly to the manufacturer’s 1.03/1.04 m family. Technical identification must be confirmed before use. Transport, assembly, dismantling and structural design are not included.

Your event.
The right equipment.

Shop by category

STINGER 8 A G3 active speaker

Key features

Overview