Audio

Shure

PSM300

From€42.35Rental price · per day · incl. VAT

Included per item

1 × P3T transmitter in a wooden mini flightcase
1 × P3R bodypack receiver

Overview

Wireless in-ear monitoring for one performer. This rental set contains one Shure P3T transmitter in a wooden mini flightcase and one P3R bodypack receiver. Adjust your listening level and stereo balance on the receiver, or use MixMode to blend two monitor feeds into a personal mono mix.

Connect the transmitter to suitable monitor outputs on your mixer. Request confirmation of earphones, batteries, power supply, antennas, cabling and any other accessories before booking; these are not automatically included in the stated set.

Tell us the country and venue of use so we can confirm the frequency band and coordinate the system with other wireless equipment. Use a safe listening level; excessive headphone volume can cause permanent hearing damage.

Specifications

Identity

Model family: PSM300 (PSM 300)

Audio

Monitoring modes: Stereo balance or MixMode two-channel mono blend
Audio frequency response: 38–15000 Hz
System latency: <0.7 ms

Wireless

RF modulation: FM, MPX stereo; Shure Audio Reference Companding

Configuration

Frequency selection: Confirm the frequency band for your country and venue before booking. The P3T and P3R must use a matching band; coordinate frequencies with other wireless equipment.
Rental configuration: Per set: one P3T transmitter in a wooden mini flightcase and one P3R bodypack receiver. Other accessories require confirmation.

Frequently asked questions

Can this system be used licence-free everywhere?

No. The hardware tuning range is not permission to transmit. Permitted frequencies, RF power and any licence requirements depend on the country and application; check the local regulator and coordinate frequencies before use.

The rental collection

Catalogue

228 items

Search in English or Dutch, including familiar equipment names and model numbers.

Submitting an enquiry does not reserve equipment. Availability and final pricing are confirmed by our team.

Pincase 50 pins+springs 4 couplers

Pincase kit containing 50 pins and springs and 4 couplers.

Pincase 100 pins+springs 8 couplers 1 hammer 1 13mm rachet

Pincase kit containing 100 pins and springs, 8 couplers, 1 hammer and 1 ratchet (13 mm).

Pipe & drape baseplate pin – 10 cm

Baseplate pin with a length of 10 cm and a diameter of 45 mm, used to connect a pipe & drape upright to its baseplate. This listing is for one pin; the baseplate and upright are separate items. Select the pin length to suit the intended upright and setup.

Pipe & drape baseplate pin – 20 cm

Baseplate pin with a length of 20 cm and a diameter of 45 mm, used to connect a pipe & drape upright to its baseplate. This listing is for one pin; the baseplate and upright are separate items. Select the pin length to suit the intended upright and setup.

Pipe & drape baseplate pin – 40 cm

Baseplate pin with a length of 40 cm and a diameter of 45 mm, used to connect a pipe & drape upright to its baseplate. This listing is for one pin; the baseplate and upright are separate items. Select the pin length to suit the intended upright and setup. The Wentex manual specifies this pin with 60 × 60 or 80 × 80 cm baseplates, depending on the upright.

Pipe & drape baseplate – 45 × 45 cm

Baseplate measuring 45 × 45 cm for the base of a pipe & drape upright. Use a suitable baseplate pin to connect the upright. This listing is for one loose baseplate; pins, uprights, crossbars and curtains are separate items. The Wentex manual pairs this plate with a 20 cm pin and a 120–180 or 180–300 cm telescopic upright. It is not the specified baseplate for an 180–420 cm upright.

Pipe & drape crossbar – 90–120 cm

Telescopic crossbar with an adjustable length of 90–120 cm for hanging a curtain between pipe & drape uprights. This listing is for one crossbar; uprights, baseplates, pins and curtains are separate items.

Pipe & drape crossbar – 180–300 cm

Telescopic crossbar with an adjustable length of 180–300 cm for hanging a curtain between pipe & drape uprights. This listing is for one crossbar; uprights, baseplates, pins and curtains are separate items.

Pipe & drape upright – 120 cm

Fixed-height 120 cm upright for a low pipe & drape screen around a control position. This listing is for one upright; select the baseplate, pin, crossbar and curtain separately.

Pipe & drape upright – 180–420 cm

Telescopic pipe & drape upright with a height range of 180–420 cm for an adjustable curtain screen. This listing is for one upright; select the baseplate, pin, crossbar and curtain separately. For this height range, the Wentex manual specifies a 60 × 60 or 80 × 80 cm baseplate with a 40 cm pin; do not combine it with the 45 × 45 cm baseplate.

Power / 3-pin DMX hybrid 1,5m

Custom-assembled 1.5 m power and 3-pin DMX hybrid cable, using Adam Hall 4 STAR HYBRID POWER DMX 325 (K4HPD325) cable. Confirm the power connector type, connector genders and both end configurations before booking; powerCON or TRUE1 compatibility is not confirmed.

Power / 3-pin DMX hybrid 3m

Custom-assembled 3 m power and 3-pin DMX hybrid cable, using Adam Hall 4 STAR HYBRID POWER DMX 325 (K4HPD325) cable. Confirm the power connector type, connector genders and both end configurations before booking; powerCON or TRUE1 compatibility is not confirmed.

Your event.
The right equipment.

Shop by category

PSM300

Included per item

Overview