Event equipment rental
Your event.
The right equipment.
Truss, cables, screens and event styling. Build your equipment list and request a quote for your dates.
Shop by category01
Choose your equipment
Select products for your quote request.
02
Plan your rental
Tell us your dates and delivery requirements.
03
Receive your quote
We confirm availability and pricing with you.
Find your equipment
Shop by category
Audio accessories
TP-Link
TL-SG105S 5-port Gigabit switch
Key features
- Power requirement
- External power adapter required. Match its voltage, polarity and connector to the actual unit label; adapter ratings vary by hardware revision. No PoE output.
Overview
Connect a small wired event network with the TP-Link TL-SG105S. Its five Gigabit Ethernet ports provide a simple, unmanaged connection between compatible computers and network equipment without a configuration interface. The fanless metal enclosure suits a desk or technical position. Count every connection: a cable to your router or another switch uses one of the five ports, leaving four for local devices. This is a non-PoE switch, not a router or Wi-Fi access point; it does not provide internet access by itself.
Specifications
Specifications
- Switch model
- TP-Link TL-SG105S; unmanaged desktop Ethernet switch
- Ethernet ports
- 5 × RJ45; 10/100/1000 Mbps auto-negotiation, Auto-MDI/MDIX
- Port planning
- Five ports total: one uplink leaves four device connections. No separate uplink socket.
- Housing and cooling
- Metal enclosure; fanless cooling; desktop or wall mounting
- Power requirement
- External power adapter required. Match its voltage, polarity and connector to the actual unit label; adapter ratings vary by hardware revision. No PoE output.
- Ethernet cabling
- Use Cat 5e or better for Gigabit Ethernet, with a maximum 100 m Ethernet link. Each device needs its own cable.
Documentation
Frequently asked questions
Does this switch provide Wi-Fi or faster internet?
Can I connect five devices and a router?
Can it power cameras or access points through Ethernet?
Can I use it with DJ or AV equipment?
What should I prepare before setup?
Which hardware revision does the manual cover?
The rental collection
Catalogue
228 items
All categories
Pincase 50 pins+springs 4 couplers
Pincase kit containing 50 pins and springs and 4 couplers.
Pincase 100 pins+springs 8 couplers 1 hammer 1 13mm rachet
Pincase kit containing 100 pins and springs, 8 couplers, 1 hammer and 1 ratchet (13 mm).
Pipe & drape baseplate pin – 10 cm
Baseplate pin with a length of 10 cm and a diameter of 45 mm, used to connect a pipe & drape upright to its baseplate. This listing is for one pin; the baseplate and upright are separate items. Select the pin length to suit the intended upright and setup.
Pipe & drape baseplate pin – 20 cm
Baseplate pin with a length of 20 cm and a diameter of 45 mm, used to connect a pipe & drape upright to its baseplate. This listing is for one pin; the baseplate and upright are separate items. Select the pin length to suit the intended upright and setup.
Pipe & drape baseplate pin – 40 cm
Baseplate pin with a length of 40 cm and a diameter of 45 mm, used to connect a pipe & drape upright to its baseplate. This listing is for one pin; the baseplate and upright are separate items. Select the pin length to suit the intended upright and setup. The Wentex manual specifies this pin with 60 × 60 or 80 × 80 cm baseplates, depending on the upright.
Pipe & drape baseplate – 45 × 45 cm
Baseplate measuring 45 × 45 cm for the base of a pipe & drape upright. Use a suitable baseplate pin to connect the upright. This listing is for one loose baseplate; pins, uprights, crossbars and curtains are separate items. The Wentex manual pairs this plate with a 20 cm pin and a 120–180 or 180–300 cm telescopic upright. It is not the specified baseplate for an 180–420 cm upright.
Pipe & drape crossbar – 90–120 cm
Telescopic crossbar with an adjustable length of 90–120 cm for hanging a curtain between pipe & drape uprights. This listing is for one crossbar; uprights, baseplates, pins and curtains are separate items.
Pipe & drape crossbar – 180–300 cm
Telescopic crossbar with an adjustable length of 180–300 cm for hanging a curtain between pipe & drape uprights. This listing is for one crossbar; uprights, baseplates, pins and curtains are separate items.
Pipe & drape upright – 120 cm
Fixed-height 120 cm upright for a low pipe & drape screen around a control position. This listing is for one upright; select the baseplate, pin, crossbar and curtain separately.
Pipe & drape upright – 180–420 cm
Telescopic pipe & drape upright with a height range of 180–420 cm for an adjustable curtain screen. This listing is for one upright; select the baseplate, pin, crossbar and curtain separately. For this height range, the Wentex manual specifies a 60 × 60 or 80 × 80 cm baseplate with a 40 cm pin; do not combine it with the 45 × 45 cm baseplate.
Power / 3-pin DMX hybrid 1,5m
Custom-assembled 1.5 m power and 3-pin DMX hybrid cable, using Adam Hall 4 STAR HYBRID POWER DMX 325 (K4HPD325) cable. Confirm the power connector type, connector genders and both end configurations before booking; powerCON or TRUE1 compatibility is not confirmed.
Power / 3-pin DMX hybrid 3m
Custom-assembled 3 m power and 3-pin DMX hybrid cable, using Adam Hall 4 STAR HYBRID POWER DMX 325 (K4HPD325) cable. Confirm the power connector type, connector genders and both end configurations before booking; powerCON or TRUE1 compatibility is not confirmed.
Rental quote
Your
quote request.
Choose your dates, review your selection by category and request a quote. We’ll confirm availability and any prices that still need checking.
No payment at this stage
Availability confirmed before booking
Delivery and setup requirements welcome